hal_pal.h File Reference

I/O Ports Abstraction Layer macros, types and structures. More...

#include "hal_pal_lld.h"

Go to the source code of this file.

Data Structures
struct	palevent_t
	Type of a PAL event record. More...
struct	IOBus
	I/O bus descriptor. More...

Macros
#define	PAL_PORT_BIT(n)   ((ioportmask_t)(1U << (n)))
	Port bit helper macro. More...
#define	PAL_GROUP_MASK(width)   ((ioportmask_t)(1U << (width)) - 1U)
	Bits group mask helper. More...
#define	_IOBUS_DATA(name, port, width, offset)   {port, PAL_GROUP_MASK(width), offset}
	Data part of a static I/O bus initializer. More...
#define	IOBUS_DECL(name, port, width, offset)   IOBus name = _IOBUS_DATA(name, port, width, offset)
	Static I/O bus initializer. More...
Pads mode constants
#define	PAL_MODE_RESET   0U
	After reset state. More...
#define	PAL_MODE_UNCONNECTED   1U
	Safe state for unconnected pads. More...
#define	PAL_MODE_INPUT   2U
	Regular input high-Z pad. More...
#define	PAL_MODE_INPUT_PULLUP   3U
	Input pad with weak pull up resistor. More...
#define	PAL_MODE_INPUT_PULLDOWN   4U
	Input pad with weak pull down resistor. More...
#define	PAL_MODE_INPUT_ANALOG   5U
	Analog input mode. More...
#define	PAL_MODE_OUTPUT_PUSHPULL   6U
	Push-pull output pad. More...
#define	PAL_MODE_OUTPUT_OPENDRAIN   7U
	Open-drain output pad. More...
Logic level constants
#define	PAL_LOW   0U
	Logical low state. More...
#define	PAL_HIGH   1U
	Logical high state. More...
PAL event modes
#define	PAL_EVENT_MODE_EDGES_MASK   3U
	Mask of edges field. More...
#define	PAL_EVENT_MODE_DISABLED   0U
	Channel disabled. More...
#define	PAL_EVENT_MODE_RISING_EDGE   1U
	Rising edge callback. More...
#define	PAL_EVENT_MODE_FALLING_EDGE   2U
	Falling edge callback. More...
#define	PAL_EVENT_MODE_BOTH_EDGES   3U
	Both edges callback. More...
PAL configuration options
#define	PAL_USE_CALLBACKS   TRUE
	Enables synchronous APIs. More...
#define	PAL_USE_WAIT   TRUE
	Enables synchronous APIs. More...
Low level driver helper macros
#define	_pal_init_event(e)
	Initializes a PAL event object. More...
#define	_pal_init_event(e)
	Initializes a PAL event object. More...
#define	_pal_init_event(e)
	Initializes a PAL event object. More...
#define	_pal_clear_event(e)
	Clears a PAL event object. More...
#define	_pal_clear_event(e)
	Clears a PAL event object. More...
#define	_pal_clear_event(e)
	Clears a PAL event object. More...
#define	_pal_isr_code(e)
	Common ISR code. More...
#define	_pal_isr_code(e)
	Common ISR code. More...
#define	_pal_isr_code(e)
	Common ISR code. More...
Macro Functions
#define	palInit()   pal_lld_init()
	PAL subsystem initialization. More...
#define	palReadPort(port)   ((void)(port), 0U)
	Reads the physical I/O port states. More...
#define	palReadLatch(port)   ((void)(port), 0U)
	Reads the output latch. More...
#define	palWritePort(port, bits)   ((void)(port), (void)(bits))
	Writes a bits mask on a I/O port. More...
#define	palSetPort(port, bits)   palWritePort(port, palReadLatch(port) | (bits))
	Sets a bits mask on a I/O port. More...
#define	palClearPort(port, bits)   palWritePort(port, palReadLatch(port) & ~(bits))
	Clears a bits mask on a I/O port. More...
#define	palTogglePort(port, bits)   palWritePort(port, palReadLatch(port) ^ (bits))
	Toggles a bits mask on a I/O port. More...
#define	palReadGroup(port, mask, offset)   ((palReadPort(port) >> (offset)) & (mask))
	Reads a group of bits. More...
#define	palWriteGroup(port, mask, offset, bits)
	Writes a group of bits. More...
#define	palSetGroupMode(port, mask, offset, mode)
	Pads group mode setup. More...
#define	palReadPad(port, pad)   ((palReadPort(port) >> (pad)) & 1U)
	Reads an input pad logic state. More...
#define	palWritePad(port, pad, bit)
	Writes a logic state on an output pad. More...
#define	palSetPad(port, pad)   palSetPort(port, PAL_PORT_BIT(pad))
	Sets a pad logic state to PAL_HIGH. More...
#define	palClearPad(port, pad)   palClearPort(port, PAL_PORT_BIT(pad))
	Clears a pad logic state to PAL_LOW. More...
#define	palTogglePad(port, pad)   palTogglePort(port, PAL_PORT_BIT(pad))
	Toggles a pad logic state. More...
#define	palSetPadMode(port, pad, mode)   palSetGroupMode(port, PAL_PORT_BIT(pad), 0U, mode)
	Pad mode setup. More...
#define	palReadLine(line)   palReadPad(PAL_PORT(line), PAL_PAD(line))
	Reads an input line logic state. More...
#define	palWriteLine(line, bit)   palWritePad(PAL_PORT(line), PAL_PAD(line), bit)
	Writes a logic state on an output line. More...
#define	palSetLine(line)   palSetPad(PAL_PORT(line), PAL_PAD(line))
	Sets a line logic state to PAL_HIGH. More...
#define	palClearLine(line)   palClearPad(PAL_PORT(line), PAL_PAD(line))
	Clears a line logic state to PAL_LOW. More...
#define	palToggleLine(line)   palTogglePad(PAL_PORT(line), PAL_PAD(line))
	Toggles a line logic state. More...
#define	palSetLineMode(line, mode)   palSetPadMode(PAL_PORT(line), PAL_PAD(line), mode)
	Line mode setup. More...
#define	palEnablePadEventI(port, pad, mode)
	Pad event enable. More...
#define	palDisablePadEventI(port, pad)
	Pad event disable. More...
#define	palEnablePadEvent(port, pad, mode)
	Pad event enable. More...
#define	palDisablePadEvent(port, pad)
	Pad event disable. More...
#define	palEnableLineEventI(line, mode)   palEnablePadEventI(PAL_PORT(line), PAL_PAD(line), mode)
	Line event enable. More...
#define	palDisableLineEventI(line)   palDisablePadEventI(PAL_PORT(line), PAL_PAD(line))
	Line event disable. More...
#define	palEnableLineEvent(line, mode)
	Line event enable. More...
#define	palDisableLineEvent(line)
	Line event disable. More...
#define	palIsPadEventEnabledX(port, pad)   false
	Pad event enable check. More...
#define	palIsLineEventEnabledX(line)   pal_lld_ispadeventenabled(PAL_PORT(line), PAL_PAD(line))
	Line event enable check. More...
#define	palSetPadCallback(port, pad, cb, arg)
	Associates a callback to a pad. More...
#define	palSetLineCallback(line, cb, arg)
	Associates a callback to a line. More...

Typedefs
typedef void(*	palcallback_t) (void *arg)
	Type of a PAL event callback. More...

Functions
ioportmask_t	palReadBus (const IOBus *bus)
	Read from an I/O bus. More...
void	palWriteBus (const IOBus *bus, ioportmask_t bits)
	Write to an I/O bus. More...
void	palSetBusMode (const IOBus *bus, iomode_t mode)
	Programs a bus with the specified mode. More...
void	palSetPadCallbackI (ioportid_t port, iopadid_t pad, palcallback_t cb, void *arg)
	Associates a callback to a port/pad. More...
void	palSetLineCallbackI (ioline_t line, palcallback_t cb, void *arg)
	Associates a callback to a line. More...
msg_t	palWaitPadTimeoutS (ioportid_t port, iopadid_t pad, sysinterval_t timeout)
	Waits for an edge on the specified port/pad. More...
msg_t	palWaitPadTimeout (ioportid_t port, iopadid_t pad, sysinterval_t timeout)
	Waits for an edge on the specified port/pad. More...
msg_t	palWaitLineTimeoutS (ioline_t line, sysinterval_t timeout)
	Waits for an edge on the specified line. More...
msg_t	palWaitLineTimeout (ioline_t line, sysinterval_t timeout)
	Waits for an edge on the specified line. More...

Detailed Description

I/O Ports Abstraction Layer macros, types and structures.

Definition in file hal_pal.h.